Products Geratech EMN Technology has been serving almost many sectors in visual systems technology for years, from education to health, finance and organization services.
  • Supports Digital to Analog audio Conversion (DAC) and Analog to Digital audio Conversion (ADC)
  • Supports input sampling rate up to 96kHz and LPCM 5.1CH
  • 30W per channel digital stereo Amplifier
  • Simultaneous audio output on both digital and analog outputs
  • Supports HDTV resolutions up to 4K2K (3840x2160@24/25/30 Hz and 4096x2160@30Hz)
  • Supports distances up to 100 meters through CAT5e/6/7 cables
  • Full 5Play™ convergence: Video, Audio, LAN serving, Power over Cable (PoC) and Control (IR & RS-232 bypass)
  • Supports control via RS-232, IR remote control, on-panel buttons and IP Control (Telnet & Web GUI)
  • Compatible with HDMI, HDCP 1.1
  • -Deep color support 8/10/12 bit source
  • -Seamless switching
  • -Supports four different modes: Matrix mode/ Dual mode/ Quad / 2x2 TV Wall mode
  • *Matrix mode: Can routes and output any 4 sources to any 4 displays with seamless switching (Note: Under output timing 1080i@50/60 input 4 will be disabled, OSD will show "IN 4 Disabled")
  • *Dual mode: Can display POP (Picture Of Picture) & PiP (Picture In Picture) image com-bined by 2 sources to be presented on the HDMI output ports (Dual A and Dual B)
  • *Quad mode: Can output all sources to a display (4 in 1) as a full image
  • *TV Wall mode: Can output any source to 4 displays (2x2 Video wall) as a full image with adjustable frame correction for 4 displays
  • -Supports OSD, RS232, Telnet, WebGUI, Remote control and on-panel controls
  • -Input resolutions support VGA-WUXGA and 480i-1080p
  • -Output resolutions support 480p-1080p
  • -Different input resolution and output resolution are selectable from OSD menu(factory default value for the output resolution is 720p@60Hz/ 2CH LPCM)
  • -Audio supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/ Dolby TruHD & DTS-HD Master Audio
  • The 4K MultiView KVM Switch is a standalone device which designed to meet the
  • requirement of multi-task. It allows the user to simultaneously monitor up to four HD HDMI multimedia
  • sources on a single HDTV and upscale the resolution up to 4K. Meanwhile, a PC connection is supported,
  • user can also fully access, control and reboot the connected computer through this switch.
  • 4K is a new standard of display which delivering four times the resolution of Full HD. The
  • EGE-4KVM-MV41 series support various input as long as built-in an HDMI connection and upscale the
  • resolution up to 4K. It means the images can be demonstrated sharper and contain more details using
  • the EGE-4KVM-MV41 series.
  • 4 x 4 Smart HDMI A/V Processor is the only complete independent HDMI
  • system that arrange four HDMI multimedia sources and dynamically exhibit them on 4 displays in
  • various mode. Each source can be independently scale. Switching do not have delays or black screen.
  • It is the ideal solution for A/V Switching, Splitting, or Broadcasting.
  • Route any HDMI multimedia source and combine them to multiple displays. Scale any input
  • source to a portion or all the displays. It’s a perfect system for broadcasting multimedia content.
  • Expand High Definition resolution to lossless 4K x 2K. Perfect for reaching beyond a single monitor.
  • Video mode selection includes 4-Pane, Picture-in-Picture, and Picture-and-Picture.
  • These modes can be dynamically changed for better surveillance viewing and verification.
  • 6 Video Mode selection with 8 Video Configuration programmable memory
  • Select any of the 4 input to be dynamically and smoothly scale onto and up to 4 monitors
  • Intuitive mode operation by front panel Push Buttons, OSD, or IR Remote Control
  • Full HD Digital Video resolution can support up to 1920 x 1200 to give a combine total of 4K x 2K video resolution
  • Support Locking HDMI cable
  • 8 trigger inputs linked directly to 8 user macros allowing for instant control activation
  • 4 relay trigger outputs to control devices such as projector screens, lighting, etc.
  • 4 IR outputs to control devices such as TVs, media players, etc.
  • Integrated IR code learning functionality
  • Multiple user control interfaces including WebGUI, Telnet and RS-232
  • Simple configuration of macros, triggers and relay settings via the WebGUI
  • PoE (Power over Ethernet) support
  • Firmware can easily be updated in the field via USB
55VM5E-A Görüntü Duvarı
  • Video compression:H.265 , H.264/AVC High Profile Level 4.0
  • -Video inputs: HDMI(support HDCP protocol)
  • -Analog video input mode: PAL, NTSC
EGE-K1S / K1
  • UK 2 or 1 gang wall plate design with adjustable LED brightness
  • 30 (18 on the 1 gang) macros for controlling user equipment
  • Up to 128 total commands can be stored and used across all macros in the system (up to 16 per macro)
  • Supports relay triggers to control compatible devices
  • Supports time and date macro scheduling (single and recurring)
  • Supports 48 hours of backup power for the internal clock and schedule function to protect against blackouts and temporary power loss
  • Supports customizable daylight savings time settings for scheduling
  • Supports Keypad, Telnet and WebGUI control
  • Supports PoE or DC power supply
  • Multiple uses for home, hotel rooms, central control rooms, conference rooms, etc.
  • Compatible with HDMI, HDCP 1.2 and DVI 1.0
  • -HDMI audio sampling rates up to 192 kHz
  • -Optical S/PDIF audio sampling rate up to 48 kHz
  • -TMDS clock frequency up to 225 MHz
  • -Supports high bit rate (HBR) audio
  • -It’s not necessary an HDMI output connection to receive audio at the analog and optical outputs
  • -HDMI cable distance test with 1080p/8 bits resolution, the Input/Output distance can run up to 15/15 meters
  • -Supports EDID management for audio formats, can switch among built-in EDID (LPCM 2CH/Bitstream) and external EDID (TV)
  • -Supports 3D signal
  • -Low power consumption
  • Video In: 4 x HDMI Type A Female (Lockable)
  • Video Out: 4 x HDMI Type A Female (Lockable)
  • RS232: 1 x DB9, Female
  • IR: 1 x Receiver and 1 x IR Extender (3.5mm Earphone Jack)
  • LEDs: 16 fixed + 24 switch
  • Switch / Button: 24 x Momentary Switch 1 x 2 Position Power Switch
  • Video Resolution: Full HD or 1920 x 1200 (WUXGA)
  • Operation Temperature: 0 ~ 40°C
  • Storage Temperature: -20 ~ 60°C
  • Humidity: 0~90% RH, Non-condensing
  • Weight: 2.2 Kg
  • Dimensions: 438 x 200 x 44 mm
  • Housing: Metal enclosure
  • Power Adapter: Power Adapter
  • Safety / Emission: FCC, CE
  • Supports digital audio input (Coaxial/Optical) and stereo analog audio output (R/L)
  • Integrated digital interpolator filter and Digital to Analog Converter (DAC)
  • Supports uncompressed digital stereo audio input
  • Compact size and easy to install
  • Supports S/PDIF 192kHz at 24-bit data for conversion to left and right analog channels
  • Inputs: 4x HDMI [4x Uncompressed AV and Data]
  • 1x RJ45 [1x IP Control]
  • 1x 9-pin D-sub [1x RS-232 Data]
  • 1x USB Mini-B [1x SERVICE Propriety Data]
  • Outputs: 1x HDMI [1x Uncompressed AV and Data]
  • PSU: 12V/3A
  • Dimensions: 432mm [W] x 172mm [D] x 44mm [H]
  • Net Weight: 2200gr
  • - Integrates 4 HDMI sources to a single display or video wall system
  • -Seamless switching between channels and windows
  • -Supports Picture-in-Picture (PIP), Picture-out-of-Picture (POP) and multi-window modes
  • -8 screen preset hot keys and 4 extra customizable screen setting favourites
  • -Supports position adjustments and individual channel size
  • -Zoom, shrink and overlay the source channels
  • -Supports Fade-In/Fade-Out, Chromakey, Mirror and Rotation (90˚ left or right and 180˚ upside down) functions
  • -Save and recall up to 4 customisable favorite screen arrangements
  • -Control switcher via OSD menu, RS-232, Telnet/Web GUI, IR remote control and on-panel controls
  • New generation Multiviewer KVM Switch, it allows you to simultaneously
  • monitor up to four computers on a single display, operate multiple computers with one keyboard/mouse set
  • The auxiliary output can be used to drive additional full screen from one of the connected computers,
  • let you operate the computer in a native manner while monitoring other computers from the 4 split fields of the primary output.
  • Remote console
  • Built-in KVM extender let you manage the servers remotely, freeing you or your installation from strict environment.
  • Multiple EGE-KVM-MV41 can be daisy-chained up to 8 units, allowsing you to manage 32 computers
  • with a single mouse/keyboard set. Moreover, with Uniclass intuitive border-switching technology
  • it is easy to switch between units just by moving the mouse pointer across the edge of the screen to the screen of another unit.
  • Multiviewer KVM is an ideal solution for multi-tasking and monitoring real-time progress such as control rooms; broadcast stations; post-production and live sets.
  • Video DVI Output:Local: 1 + 1
  • Console Keyboard / Mouse Connector:2 x USB Type A Female
  • USB 2.0 Hub Port:2 x USB Type A Female
  • Console Video Connector: 2 x DVI-I Female
  • Audio Connector: 1 x 3.5 mm Audio Jack
  • PC Keyboard / Mouse Connector: 4 x USB Type B Female
  • PC Video Connector: 4 x DVI-I Female
  • CAT5 Extender Port: -
  • PC Audio Connector: 4 x 3.5 mm Audio Jack Female
  • RS-232 Connector: 2 x RJ-45 Female
  • PC SelectionHotkeys / OSD / Push Button
  • Display Resolution:1920 x 1200
  • Operation Temperature:0 ~ 40 C
  • Storage Temperature: -20 ~ 60 C
  • Humidity Limits: 0 ~ 90% RH, Non-condensing
  • Safety / Emission: FCC, CE
  • HDMI 2.0 (up to 4K@60Hz 4:4:4) and DVI 1.0 compliant
  • HDCP 1.4 and 2.2 compliant
  • Analysis of source and sink data paths up to 18Gbps HDMI signals
  • Analysis of HDMI data packets
  • Analysis and control of HDCP v1.4 and v2.2
  • Analysis and emulation of EDID data, including SCDC
  • Analysis of input audio signals
  • HDR bypass and analysis support
  • Generate HDMI timings up to 18Gbps (4096×2160@60Hz 4:4:4, 8-bit)
  • Generate HDMI and VGA signal outputs